Baltur TBG ME series gas burners

100 to 2100 kW.

  • Gas-fired burners, EN676.
  • Two-stage progressive/modulating operation.Baltur gas burner
  • Ability to operate with output modulation by means of automatic RWF40 regulator mounted on the control panel (to be ordered separately with the modulation kit).
  • Compatible with any type of combustion chamber, according to EN303 standard…
  • High blowing efficiency, low electrical input, low noise.
  • Air-gas mixing at blast-pipe.
  • Burnt gas recycling blast-pipe able to achieve very low pollutant emissions, particularly with regard to nitrous oxides (NOx).
  • Maintenance facilitated by the fact that the mixing unit can be removed without having to remove the burner from the boiler.

TBG 45 – 60 ME

  • Low NOx and CO gas-fired burners, EN676 “Class III”.
  • Modulation ratio 1:4.
  • Regulation of air flow rate for first and second stage with damper closure on standby to prevent in-flue heat dispersion.
  • Gas adjustment gas by throttle valve controlled by electronically controlled step servo motor.
  • Tightness gas valve control, EN676.
  • Comes with 4 and 7-poles connectors, 1flange and 1 insulating seal to connect the burner to the application.

TBG 85 – 120 – 150 – 210 ME

  • Partial combustion gas recirculation blast-pipe with low NOx emissions (class II).
  • Ambidextrous hinged combustion head allowing an easy maintenance access without removing the burner from the boiler.
  • Air capacity adjustment by means of linear opening damper using electronically controlled step servo motor.
  • Automatic closure of the air damper during stand-by.
  • Electrical panel that connects by 4 and 7 pole plugs/sockets provided.
  • Electrical panel with protection rating of IP 55.
  • Sliding boiler coupling flange to adapt to the head protrusion of the various types of boilers.
  • High turndown ratio (1:5).

For more information, Visit the Baltur website.

Previous post:

Next post: